DIY Spin the Bottle Dog Toy Perfect for Curious Pups


Looking for some DIY dog enrichment toys? Well, you’re in the right place! If your dog loves treats, then we have the cutest DIY dog enrichment toy we are calling “Spin the bottle”. This simple DIY dog project is a dog play station that can keep curious pups busy for a really long time! Our dog loved this DIY dog treat station so much that we just had to share it. These DIY dog enrichment toys are a great way to keep your dog entertained, learning, and sharp!

Your dog will love playing this dog treat game!

Homemade Spin the Bottle Dog Game

Create this dog DIY project to keep your dogs busy at home. You can use special treats in this DIY dog treat station or make mealtime extra challenging and fun.

Related: Make homemade dog treats

Dogs love the challenge of figuring out how to get the food out of the bottles. It is great entertainment for the entire family!

This post contains affiliate links.

Supplies Needed to Make DIY Dog Toy Project

Directions to Make Spin the Bottle Dog Game

Step 1

Using a saw, cut the 1×4 into:

  • Three pieces that are 16 inches long each
  • Two pieces that are 10 inches long each

Cut the dowel to 17 3/4 inches long.

Step 2

Using a drill, create:

  • Drill a 1/4-inch hole through two of the 16 inch pieces about 4 inches from the top. You want to make sure they are aligned so that you can fit the dowel rod through the holes.
  • Drill holes through the sides of each plastic bottle.

Step 3

diy dog enrichment toys- Step 3 - how to assemble the diy dog treat station - Kids Activities Blog
This is how to assemble your DIY dog treat station.

Create the frame of the game by attaching the three 16 inch pieces into a “U” shape. The drilled holes should be at the top of the “U.” Attach the 10 inch pieces to the sides of the frame to create stabilizing legs.

Step 4

Run the dowel rod through the plastic bottles and through the top of the frame.

Step 5

Fill the bottles with treats or food. As the dogs spin the bottle, the treats will fall out!

diy dog enrichment toys- Dog looking at new DIY dog treat station with hanging bottle
Let’s play!

Finished DIY Dog Treat Station

It took a bit for Kaylee and Petra to figure it out. Petra actually was trying to convince me that I should just spin the bottle for her!

diy dog enrichment toys- dog howling at DIY dog treat station with two bottles hanging from dowel with food inside - Kids activities Blog
Howling makes the game more fun!

There’s that distinctive beagle howl!

Active Time
1 hour

Total Time
1 hour

Difficulty
Medium

Estimated Cost
$10

Materials

  • 1×4 that is 8’ long
  • 1/4-inch dowel rod
  • 1/4-inch drill bit
  • 2 plastic bottles

Tools

  • Nails or screws
  • Wood glue
  • Saw

Instructions

    1. Cut the 1×4 into three pieces that are 16 inches long and two pieces that are 10 inches long.
    2. Cut the dowel to 17 3/4 inches long.
    3. Drill a 1/4-inch hole through two of the 16 inch pieces about 4 inches from the top. You want to make sure they are aligned so that you can fit the dowel rod through the holes.
    4. Drill holes through the sides of each bottle.
    5. Create the frame of the game by attaching the three 16 inch pieces into a “U” shape. The drilled holes should be at the top of the “U.” Attach the 10 inch pieces to the sides of the frame to create stabilizing legs.
    6. Run the dowel rod through the plastic bottles and through the top of the frame.
    7. Fill the bottles with treats or food. As the dogs spin the bottle, the treats will fall out!

More Dog Fun from Kids Activities Blog

Did your dog love the new DIY dog toy?



Source link

About The Author

Scroll to Top